Buchi Scrubber K-415 Manual de usuario descargar pdf (Pagina 33)

5 Putting into operation

33 K-415 Operation Manual, Version B

5.7.2 Hose connections for the TripleScrub

The TripleScrub consists of the neutralization vessel, the adsorption vessel, and the condenser unit.

To establish the hose connections, proceed as follows:

• Put hose connectors GL 14 with seals on all PTFE hoses.

• Connect the emission source to the condenser inlet e.

• Connect the condenser outlet f to the neutralization vessel a.

• Connect the adsorption vessel b to the bypass valve c.

• Cut off a piece of the provided silicone hose and connect the cooling water source to the cooling

water inlet of the condenser g

. Secure it with a hose clamp

• Cut off a piece of the provided silicone hose and connect the cooling water outlet of the condenser

h to the waste water system.

7 8

a Neutralization stage

b Adsorption vessel

c Bypass valve

d Silencer

e Inlet for fumes from emission source

f Outlet to neutralization vessel (top)

g Cooling water inlet (bottom)

h Cooling water outlet (top)

i Condenser

Fig. 5.12: Hose connections for the TripleScrub

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Sin comentarios

Buchi Scrubber K-415 Manual de usuario Pagina 33