Buchi Syncor Polyvap Manual de usuario descargar pdf (Pagina 34)

Syncore Platform

6 Maintenance

6.1 Cleaning

Single platform

• Useaclothdampenedinalcoholtocleanthehousingof

the Syncore single platform. If it is severely fouled, a mild

detergent and water may be used.

• Neverusehardbrushestocleanthebaseplate.

• Ifitisseverelyfouled,theblackrubberringaroundthe

base plate may be removed and cleaned with a mild

detergent or with alcohol.

6.2 Routine inspection of the equipment

(monthly)

General

• Theunitmustrunquietly,withoutanysignicantnoises

from its drive.

• Theunitmustrunwithoutanystrongvibrations.

Rack mount

Check the corner brackets  and the springs  for the rack

mount on the base plate:

• Nobrokensections;

• Screwsscrewedtightlyintothecornerbrackets;

• Rackheldsecurelyinplace.

Base plate mount

The base plate rests on four vibrating elements that take up

the vibrations of the base plate.

Inspect these visually once a month:

• Nobrokensections;

• Nowear;

• Noloosebolting

To do this, lift the black covering slightly and look into the

unit from the side.

Figure 26: Corner brackets and springs





1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 45 46

Sin comentarios

Buchi Syncor Polyvap Manual de usuario Pagina 34