Buchi SpeedDigester K-436 Manual de usuario descargar pdf (Pagina 48)

8 Troubleshooting

48 K-425 / K-436 Operation Manual, Version A

8.2 Device fuses

To change a defective fuse proceed as follows

Switch off the SpeedDigester and unplug the power cord.•

To access the glass fuses on the rear side use a ﬂat screwdriver blade. •

➥ Turn it approx. 5 turns anticlockwise to free the insert.

➥ Take out the insert together with the fuse.

Replace the defective fuse (see technical data for fuse type!)•

Reconnect the SpeedDigester to the mains.•

WARNING

Death or serious burns by electric current.

Switch off the instrument•

Disconnect the power cord and prevent unintentional restart before removing the fuse holder•

Do not touch the fuse or the fuse holder with wet hands•

Exchange defective fuses only with the original type•

T 10A L 250 V

Note

Device fuses may blow occasionally due to voltage peaks under high system load. When fuses burn

frequently, inform your customer service!

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 57 58

Sin comentarios

Buchi SpeedDigester K-436 Manual de usuario Pagina 48