Buchi Multivapo P-12 Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 76
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
5 Putting into operation
40 Multivapor™ Operation Manual, Version E
5.3.2 Assembling the Woulff bottle (optional)
Fig. 5.22: Assembling the Woulff bottle
1
Fix the Woulff bottle holder on the bottom of the instrument by replacing the existing screws with the provided
longer screws.
2
Fix the Woulff bottle holder on the rear side of the instrument by replacing the existing screws with the provi-
ded longer screws.
Add the cover of the Woulff bottle from above to the holder.
Fix the cover from below on the holder with the provided O-ring.
Place the gasket from below into the cover.
Screw the bottle into the holder.
Connect the delivered tube on the left angled connector of the cover.
Connect the tube from the condenser to the Woulff bottle on the right straight connector (not connected in the
figure).
5.3.3 Anti-seismic tie-down
1
a Hole to fix the instrument in earthquake-sus-
ceptible regions.
Fig. 5.23: Anti-seismic tie-down
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Comentarios a estos manuales

Sin comentarios